Electromagnetic Fields (Emf); Safety System; Overheat Protection; Preparing For Use - Philips HR1368 Bedienungsanleitung

EnglisH
8
- If the ingredients stick to the wall of the beaker or the chopper bowl,
switch off the appliance and loosen them with a spatula or add some
liquid.
- Never fill the beaker or the chopper bowl with ingredients that are
hotter than 80°C/175°F.
- Do not process more than three batches without interruption. Let
the appliance cool down to room temperature before you continue
processing.

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding
electromagnetic fields (EMF). If handled properly and according to the
instructions in this user manual, the appliance is safe to use based on
scientific evidence available today.

safety system

The appliance is equipped with a built-in safety system. The appliance only
functions if you press and hold the safety button while you press the on/
off button. Release the safety button when the appliance starts to
operate. As soon as you release the on/off button, the safety
system automatically resets to its off position to protect against
unintentional operation of the appliance.

overheat protection

The appliance is equipped with a built-in overheat protection. If you
process a heavy load, the motor unit may become hot. If this happens, the
built-in safety system switches off the appliance and the charging light
lights up red. Let the appliance cool down for 10 minutes before you
continue to use it.
Before first use
Thoroughly clean the parts that come into contact with food before you
use the appliance for the first time (see chapter 'Cleaning').

preparing for use

There are two ways to install the charger: