Installation; Weighing Food - Silvercrest retro EKWR 5 A1 Bedienungsanleitung

Installation

1. Place the scale on a fl at and stable surface.
2. Remove the two screws 2 from the cradle 3 using a spanner and a
screwdriver.
3. Place the cradle 3 on the weighing mechanism so that the holes for the
screws 2 are arranged one above the other and the bent arms of the
cradle 3 are pointing upwards.
4. Push the screws 2 through the holes in the cradle 3 and screw the nuts 4
onto them from below (see fold-out page).
5. Place the weighing bowl 1 onto the cradle 3.
NOTE
► The appliance may only be used when fully assembled.

Weighing food

CAUTION – PROPERTY DAMAGE!
► Do not load the scale with more than 5 kg. The scale could be irreparably
damaged.
1. If you have not done this already: place the weighing bowl 1 on the
cradle 3.
2. Turn the zero setting wheel 5 until the pointer 6 points to zero.
3. Place the food in the bowl 1.
The pointer 6 shows the weight on the scale 7.
–
Read the outer digits on the scale 7 for the weight in kilograms/grams.
–
Read the inner digits on the scale 7 for the weight in pounds (lb)/
ounces (oz).
EKWR 5 A1
GB
IE
5