Mixcder ShareMe 7 Bedienungsanleitung Seite 9

10. Control Instructions
Function
Power on
Power off
Increase volume
Decrease volume
Play media
Pause/restart media
playback
Skip to next track
Skip to previous track
Answer a call*
Reject a call*
End a call*
Switch the call
between a phone
and a headphone*
Answer a new call and
hang up the current call*
Keep the current call
and answer a new call*
Redial the last number*
The "*" is available to the primary headphone with enabled ShareMe
function.
Note:
- ShareMe 7 will pair with the last paired device automatically
when turned on. But for some computers or laptops you will
need to manually pair every time.
- There will be a alert tone when the volume reaches the
minimum or maximum level.
- The microphone can't work when using a wired headphone.
Downloaded from www.Manualslib.com
Operation
Press and hold the power button 3 seconds. And
the LED flashes blue and sounds "Power on".
Then flashes blue every second.
Press and hold the power button 3 seconds. And
the LED flashes red and sounds "Power off".
Press the Volume Up V+ button
Press the Volume Up V- button
Press the power button
Press the power button
Long press V+ button
Long press V- button
The LED flashes red twice every second and press
the power button to answer the call. Then the LED
flashes blue twice every second.
Press and hold the power button for 2 seconds
Press the power button
Press and hold the power button for 2 seconds
to switch the on line call between a phone and
headphone
Press the power button
Press and hold the power button
Press and hold the power button for 2 seconds
manuals search engine
EN-8