Zeiss SL 120 Gebrauchsanweisung Seite 56

22
Assembly
•
Connect the camera to the connecting cable without turning on the
camera's power unit.
Caution
Do not turn the miniature camera's power unit on until the camera
cable is firmly connected at both ends!
When disassembling, the procedure should be carried out in the reverse
order:
The power unit must be turned off before removing the camera cable.
•
Insert the adapter ring into the opening (2, Fig. 21) in the compact
video attachment (1, Fig. 21) and observe the monitor image.
Note
The miniature camera can be focused by moving it along the axis.
The image can be adjusted so that it is not reversed by rotating
about the axis.
•
When the focus and image position are correct, tighten the locking
screw for the miniature camera (3, Fig. 21) in order to lock the
camera.
Caution
Please observe the user's manual for the camera you are using.
Warning
Ensure that the miniature camera set is approved for use as a medical
product accessory.
000000-1363-329 SL 120 11.07.2006