Set-Up For Fahrenheit Degree Type - Rotex Rkrtr Installationsanleitung

4.1.
Refer to the operation manual how to change parameter in user
menu.
1st
code
‚
4.2.
For heating/cooling applications, set the following codes:
1st
code
‚
4.3.
If EKRTETS is installed as floor temperature sensor it can be
used to manage and thus protect the floor temperature. Refer to
"Installation of EKRTETS as floor temperature sensor (only for
floor heating/cooling applications)" on page 3. When this function
is active the icon
In cooling mode, the dew prevention function will make sure
there will be no condensation on the floor. The dew point is
calculated based on room temperature and room humidity.
When the floor temperature drops below the dew point the
cooling demand will be temporarily stopped and the icon
displayed.
Installation manual
15
Downloaded from www.Manualslib.com

Set-up for Fahrenheit degree type

2nd
code Description

Degrees type.
Set-up for heating/cooling applications
2nd
code Description

Cooling mode present?
Set-up floor temperature protection and dew
prevention function (only for floor heating/cooling
applications)
7
flashes below the ambient temperature.
manuals search engine
Range
°C/°F
Required
setting
ÌlË
N
is
RKRTR + EKRTETS
Room thermostat
4PW56107-1