Dmx Operation - EuroLite LED Z-2000 Bedienungsanleitung

DMX operation

Setting the number of DMX channels and the DMX starting address
For operation with a controller with DMX512 protocol, the device is equipped with 9 control channels.
However, it can also be switched to a mode with 5 channels if different functions are required. To be able to
operate the device with a DMX controller, the DMX starting address must be set. The starting address
depends upon which DMX controller is being used. Please refer to the controller's documentation.
1 Press the MENU button so many times until Addr is indicated in the display. Confirm with the ENTER
button.
2 The display indicates 5 CH (5 DMX channels) or 9 CH (9 DMX channels). Use the buttons UP and
DOWN to select the desired number of DMX channels. Confirm with the ENTER button.
3 Now the display indicates the menu item for the DMX start address d***. Use the buttons UP and DOWN
to set the address. Confirm with the ENTER button.
4 A dot will flash when DMX signals are being received. If the control signals are not available, the display
will flash.
Note: Please make sure that you do not have any overlapping channels in order to control each device
correctly and independently from any other fixture on the DMX chain. If several devices are addressed
similarly, they will work synchronically.
Functions in DMX mode
5-channel mode
Channel Value
1
000 – 127 Motor rotation angle
Motor
128 – 255 Motor automatic function with increasing speed
rotation
2
000 – 255 Total brightness 0-100%
Master Dimmer
3
000 – 009 No function
Derby
010 – 255 Strobe with increasing speed 0-100%
Strobe
000 – 009
010 – 019
020 – 029
030 – 039
040 – 049
050 – 059
060 – 069
070 – 079
4
080 – 089
Preset colors
090 – 099
100 – 109
110 – 119
120 – 129
130 – 139
140 – 149
150 – 159
160 – 255
000 – 009
010 – 049
5 050 – 089
Auto mode/
090 – 129
Sound control
130 – 169
170 – 209
210 – 255
Function
No function
Red
Green
Blue
White
Amber
Red + Green
Green + Blue
Blue + White
Red + Amber
Red + Blue
Green + White
Blue + Amber
Red + White
Red + Green + Amber
All LEDs on
LED Color combination change with increasing speed
No function
Auto program 1 with increasing speed
Auto program 2 with increasing speed
Auto program 3 with increasing speed
Sound control program 1 with increasing speed
Sound control program 2 with increasing speed
Sound control program 3 with increasing speed
26/32 00127847, Version 1.0