Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Connection to the mains
The device uses an auto-range power supply that accepts input voltages between 100 und 240 volts.
1
Connect the device via the mains cable to a grounded mains socket. Thus the unit is switched on.
2
To switch off the unit, disconnect the power plug.
3
Do not connect the unit to the mains voltage via a dimmer. For a more convenient operation, use a mains
outlet which is switchable.
OPERATION
After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. The operating modes can be selected by means of the display and the control buttons. All settings
remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone
mode via the control board and the EUROLITE IR-7 remote control or in DMX-controlled mode via any
commercial DMX controller.
Menu structure
Mode
DMX mode
Preset colors
Automatic mode
Sound control
Running speed in
automatic mode and
sound
Microphone sensitivity
for sound control
Individual color mix
Dimmer
Fade
Sound control silent
scene
Slave mode
IR remote control
Display
d001-512
9CH
Addr
d001-512
5CH
Stat
S 01-15
Auto
Au 1 – 3
Soun
So 1 – 3
SPEE
SP 1-9
SEnS
SE 1-9
r000-255
g000-255
Colo
b000-255
U000-255
A000-255
diMM
dI 1-dI 9
on
Fade
oFF
on
SILE
oFF
SLAV
Slave
on
InFr
oFF
23/32
Function
9-channel mode and start address
5-channel mode and start address
Constant lighting in one of 15 colors
Auto program
Sound program
Program running speed
slow > fast
Microphone sensitivity
low > high
Red 0-100%
Green 0-100%
Blue 0-100%
White 0-100%
Amber 0-100%
Total brightness (Stat, Auto, Soun, and
Colo modes) dark > bright
Fade on in Auto and Sound mode
Fade off in Auto and Sound mode
LEDs off if there is no music signal
LEDs remain on if there is no music signal
Slave mode
IR remote control on
IR remote control off
00127847, Version 1.0
Werbung
Inhaltsverzeichnis
