Precautions On Where To Mount The Projector - Epson ELPMB48 Bedienungsanleitung

At least two people are needed for the installation. Make sure to provide a sturdy
scaffold for this work.
Otherwise, you may fall or drop the projector and cause injury.
Precautions on Where to Mount the
Projector
Carefully read the warnings in "Safety Instructions / Support and Service Guide" supplied with
your projector before starting the installation to determine a suitable place to install it. In
particular, pay attention to the following items.
v Set the projector up in a location where direct sunlight or strong light from fluorescent lamps
does not shine onto the receiver for the remote control. Strong light shining onto the receiver
for the remote control may interfere with remote control operations.
v Install the projector so it is away from the air outlet of air conditioners or other similar devices. If
air from an air conditioner blows directly onto the projector, the surrounding temperature
increases and the projector may not operate correctly.
v Make sure there is a big enough gap between the projector and the wall. See the User's Guide
supplied with your projector for details on the necessary distance. If the projector is too close to
the wall, the surrounding temperature increases and the projector may not operate correctly.
v To limit the effect of external noise, we recommend that you position the projector so that the
cable connecting it to a computer or other devices is no longer than 20 meters.
v The projector should be installed in a location that is free from dust and moisture to prevent the
lens and internal optical parts from becoming dirty.
v Do not install the projector in a location beyond its operating temperature range. Doing so can
cause it to malfunction.
v Closing the curtains in a bright room makes the projected image easier to see.
Caution
23