Safety Precautions - Epson ELPMB22 Bedienungsanleitung

Introduction
This product is for mounting an Epson Multi-Media Projector on the ceiling.
ELPMB22 is for medium-size projectors and ELPMB23 is for small projectors. See
our website or product catalog to find out which model can be used to mount your
projector.
To adjust the height of where the projector is installed, purchase a separate
extension pipe with height adjustment function.
→
For details, see "4 Extension Pipe" on page 11.
To ensure the safe use of this product, read this instruction manual carefully and
keep it for future reference.
Epson accepts no responsibility for any damage or injury caused by incorrect
mounting, assembly or handling.
The assembly and mounting illustrations show ELPMB22. The design of the actual
product may differ from that shown in the illustrations.
Specifications are subject to change without notice.

Safety Precautions

The warning mark shown below is used throughout this instruction manual to ensure
correct use and to prevent personal injury or property damage. Make sure you
understand these warnings when reading this instruction manual.
Warning
Incorrect handling resulting from ignoring a warning mark could result
in serious injury or even death.
Features
Ball joint structure enables angle adjustment
Adjust the angles of horizontal rotation, vertical tilt and sideways tilt.
Easy mount/detach action simplifies access to the projector
Mount and detach the projector from the ceiling mount easily.
Scale sticker makes lens center alignment easy
Move the lens center horizontally in relation to the screen using the scale sticker as
a guide.
2