Safety Instructions; Explanation Of Symbols; Safety Precautions For Installation - Epson ELPMB29 Bedienungsanleitung

Safety Instructions

For your safety, read all the instructions in this guide, the User's Guide for your projector, and Safety Instructions before
using this product. Incorrect handling that ignores instructions in these guides could damage the product or could result
in personal injury or property damage. Keep this guide at hand for future reference.

Explanation of Symbols

The warning marks shown below are used throughout this guide to prevent personal injury or property damage. Make
sure you understand these warnings when reading this guide.
This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to
Warning
incorrect handling.
This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage
Caution
due to incorrect handling.
This symbol indicates relevant or useful information.
Symbol indicating an action that must not
be done

Safety Precautions for Installation

Follow the instructions in this guide when installing the product.
If the instructions are not followed, the product may fall or collapse, resulting in personal injury or an accident.
Handle the power cord carefully.
Incorrect handling may cause fire or electric shock. Observe the following precautions when handling:
・Do not handle the power plug with wet hands.
・Do not use a power cord that is damaged or modified.
・Do not pull the power cord with too much force when passing it through the base frame unit.
Do not install this product in a place where it might be subjected to vibration or shock.
Vibration or shock could cause damage to the projector or mounting surface. It could also cause this product or projector to fall
and cause serious personal injury or even death.
Inspect this product on a regular basis to ensure there are no broken parts or loose screws.
If there are any broken parts, stop using this product immediately. Otherwise, this product or projector may fall or collapse, and
cause an accident or personal injury.
Never modify this product.
Tighten all screws firmly after installation.
Otherwise, this product or the projector may fall or collapse, and cause personal injury or an accident.
Install this product on a table that meets the following conditions.
・The tabletop is 15 to 80 mm (0.6 to 3.1") thick.
・The tabletop is strong enough to support the weight of this product.
・The table is stable enough not to collapse after installation of this product (legs are not pointing inwards or collapsible, for
example).
・The table is strong enough to take the weight of the projector and this product.
Do not use screw-locking adhesives, lubricants, or oil to install this product on a table.
If you use screw-locking adhesives, lubricants or oil on the attachment plate fixing part of the projector, the case may crack and
cause the projector to fall, resulting in personal injury or property damage.
Do not lean against or apply any force to the table mount or projector.
Otherwise, the table mount or projector may fall or collapse and cause an accident or personal injury.
Symbol indicating an action that should be
done
Warning
2