Chauvin Arnoux G72 Bedienungsanleitung Seite 10

Thank you for purchasing a G72 current clamp. This clamp should only be used
only with the C.A 616X machine testers and the C.A 6424 ground tester.
For best service from your current sensor:
„ read these operating instructions carefully,
„ comply with the precautions for use.
WARNING, risk of DANGER! The operator must refer to these instruc-
tions whenever this danger symbol appears.
Application or withdrawal authorized on bare conductors carrying danger-
ous voltages. Type A current sensor as per IEC 61010-2-032.
The arrow indicates the direction of the current.
The product has been declared recyclable after analysis of its life cycle
in accordance with the ISO 14040 standard.
Chauvin Arnoux has adopted an Eco-Design approach in designing
this appliance. Analysis of the complete lifecycle has enabled us to
control and optimize the effects of the product on the environment. In
particular, this appliance exceeds regulation requirements with respect
to recycling and reuse.
The CE marking guarantees conformity with European directives, in
particular LVD and EMC.
The rubbish bin with a line through it indicates that, in the European
Union, the product must undergo selective disposal in compliance with
Directive WEEE 2002/96/EC. This equipment must not be treated as
household waste.
Definition of measurement categories
„ Measurement category IV corresponds to measurements taken at the source of
low-voltage installations.
Example: power feeders, counters and protection devices.
„ Measurement category III corresponds to measurements on building installations.
Example: distribution panel, circuit-breakers, machines or fixed industrial devices.
„ Measurement category II corresponds to measurements taken on circuits directly
connected to low-voltage installations.
Example: power supply to electro-domestic devices and portable tools.
ENGLISH
10