Control Via Amazon Alexa; Setting Up The Nuvola Account - TechniSat DIGITRADIO 601 Bedienungsanleitung

to the instruction manual for your external device for more information on wireless
battery charging.

19 Control via Amazon Alexa

You can control the DIGITRADIO 601/631 conveniently via an Amazon Echo device
using the Alexa voice assistant. Several basic requirements are needed for this.
1. The DIGITRADIO 601/631 must be connected to the Internet.
2. You need an Amazon Alexa compatible device, such as Amazon Echo,
which has a registered Amazon account and is also connected to the
Internet.
3. The DIGITRADIO 601/631 and Amazon Echo device must be located on the
same network.
4. You need to set up the UNDOK App from your smartphone manufacturer's
App store.
5. You need a Frontier Nuvola account and the Nuvola skill for Alexa.

19.1 Setting up the Nuvola account

> Download and install the UNDOK App from your smartphone manufacturer's
App store.
> Once you have opened the UNDOK App, the audio systems overview appears
with all the devices on your network.
In order for the Alexa voice controller to clearly identify and control the
DIGITRADIO 601/631, you should assign a unique name to the radio in
advance (e.g.: kitchen, living room, etc. Note that letters such as Y, those with
accents, or numbers can lead to misinterpretation). To do this, select the
DIGITRADIO 601/631 by tapping on it in the audio device overview. Then tap
on the cog icon at upper right and then on the Rename field.
In the audio systems overview, tap on the cog icon.
1.
Tap on My Frontier Nuvola account.
2.
3. To create a new account, tap on Register.
4. Enter your name, email address and password for the new account. This data
will be required again later for the Nuvola skill.
5. Tap on Register to set up the account.
DE
EN
FR
IT
NL
DA
PL
SK
SL
77