Switching Off The Alarm After Being Woken; Switching Off The Alarm; System Settings; Equaliser - TechniSat DIGITRADIO 601 Bedienungsanleitung

The alarm is active as soon as you have set the alarm repeat to Daily, Once,
Weekend, or Workdays. The status bar shows an alarm symbol with the
corresponding number of the active alarm.

16.2.2 Switching off the alarm after being woken

> Push the On/Standby button to switch the alarm off.
> Press the SNOOZE button to switch on the snooze function. By repeatedly
pressing SNOOZE you can also select the length of the pause from 5, 10, 15
or 30 minutes.
The alarm symbol appears in the display again if the alarm repeat is set to
Daily, Weekend or Workdays.

16.2.3 Switching off the alarm

Select the corresponding alarm under > Repeat: Off.
>

17 System settings

All settings explained in this section apply equally to all sources.
Open the menu and use the / buttons to select [Main Menu > System
>
Settings]. Press the OK button to open the system settings.
If you are in a submenu, select the main menu as described in Section 7.1.

17.1 Equaliser

> Press the MENU button and then select [Main Menu > System Settings >
Equaliser].
Here you can carry out different equaliser settings to adapt the sound to your taste.
You can choose from:
Normal, Jazz, Rock, Soundtrack, Classic, Pop, News, and My EQ.
Use the / buttons to select the equaliser setting and press the OK button
>
to accept the setting.

17.1.1 My EQ setting

In the menu select [System Settings > Equaliser > My EQ settings].
>
Select [Bass] to increase/decrease the bass or [Treble] to increase/decrease
>
the treble.
Change the value with the  or  buttons and press OK.
>
DE
EN
FR
IT
NL
DA
PL
SK
SL
71