Pairing; Pairing Via Nfc; Playing Music - TechniSat DIGITRADIO 601 Bedienungsanleitung

13.2 Pairing

> Activate Bluetooth on your music player, e.g. a smartphone or tablet.
If you activate Bluetooth on your music player, please consult the
corresponding instruction manual for the device you wish to pair with the
DIGITRADIO 601/631.
Please note that only 1 device can be connected with the DIGITRADIO
601/631 at any time.
Ensure that you do not exceed the maximum Bluetooth range of 10 metres
to guarantee excellent playback quality.
> Select the list of Bluetooth devices found on your music player.
> Look for the DIGITRADIO 601 or DIGITRADIO 631 entry in the list and select
it. If the selection requires a PIN, enter 0000 (4 x zero).
> If the pairing has completed successfully, the [BT] symbol in the DIGITRADIO
display stops flashing.

13.2.1 Pairing via NFC

> If your external device supports pairing via NFC, place your smartphone in the
centre of the places marked with the NFC logo on the top of the DIGITRADIO
601/631. Follow the instructions on your external device. The two devices are
now paired automatically.
Pay attention to the information in your external device's instruction manual
regarding the NFC function. Not all devices/manufacturers support automatic
pairing via NFC.

13.3 Playing music

> Select a music track on your music player and play it.
> The sound is now played via the DIGITRADIO 601/631.
You can use the Play buttons on the DIGITRADIO remote control to control
the playback on your music player (only with compatible devices).
Ensure that the volume on your music player is not set too low.
66