Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4.0 Maintenance
The MARK Infra ER electric radiant panel is made from durable materials, however regular care
and maintenance of your heater will help prolong the life of the heater.
1.
It is recommended that you hose down the heater and with a soft cloth gently wipe the
surfaces of the heater with a mild detergent to remove the built up contaminants from the
environment. Then rinse all detergent off the heater.
2.
All chemicals in the atmosphere including cigarette smoke, pollution etc. will tarnish the
surface of the heater. In this case, additional cleaning and maintenance may be required.
3.
Carrying out the cleaning process at least every three months will reduce the amount of
build up and keep the MARK Infra ER electric radiant panel in good condition.
4.
If the heater is in a corrosive environment eg. salt spray, we recommend that you clean your
heater with a light spray of fresh water every week. After cleaning, turn the heater on for 20
minutes to dry any water residue and prevent water staining.
5.
Before cleaning or inspection activity, the heater must be switched off and cooled down
completely.
6.
Do not use any abrasive materials or products to clean the heater, this includes solvents,
citrus based cleaners or other harsh cleaning products.
7.
When handling the heater, ensure that your hands are clean or that you use clean gloves as
grease or dirt can mark the surface of the heater.
8.
Do not use high pressure water to clean heaters, light water spray only.
Storage: Store the heater in a cool, dry location when not in use to prevent dust and dirt build up.
Use packaging carton to store.
5.0 Recycling
At the end of the electrical products useful life it should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer for recycling
advice in your country.
10
Werbung
Inhaltsverzeichnis
