Fully Built In Dishwasher - Samsung DW60M5070IB Benutzerhandbuch

Installing your dishwasher

FULLY BUILT IN DISHWASHER

Be sure that you or your installer follow these instructions closely so that your new dishwasher works
properly and that you're not at risk of injury when washing dishes.
New installation
If the dishwasher is a new installation, most of the installation work must be done before the
dishwasher is moved into place.
Replacement
If the dishwasher is replacing an old dishwasher, you must check the exising dishwasher connections
for compatibility with the new dishwasher. Replace the existing connections as necessary.
STEP 1. SELECTING THE BEST LOCATION FOR THE DISHWASHER
The installation position of dishwasher should be near the existing inlet and drain hoses and power
cord.
One side of the cabinet sink should be chosen to facilitate the connection of drain hoses of the
dishwasher.
1. Choose a place near the sink to facilitate the installation of inlet and drain hoses.
2. Less than 5 mm between the top of dishwasher and cabinet and the outer door aligned to cabinet.
Cabinet dimensions (unit: mm)
34_ Installing your dishwasher
DW60M5070IB_ET_DD81-02615K-00_EN.indd 34 DW60M5070IB_ET_DD81-02615K-00_EN.indd 34
600
550
598
53
670~800
580
50 50
100 100
2019-09-17 2019-09-17 2:50:44 2:50:44