Samsung DW60M5070IB Benutzerhandbuch Seite 131

3. If dishwasher is installed at the corner of the cabinet, there
should be some space when the door is opened.
Depending on where your electrical outlet is, you may need to cut a hole in the opposite cabinet side.
STEP 2. CHECKING WATER SUPPLY AND ELECTRICAL
REQUIREMENTS
• The water supply line pressure must be between 0.04-1.0 MPa.
• Supply cold water only. Make sure that the water temperature does not exceed 60 ˚C.
CAUTION
• Do not supply hot water. Otherwise, the product may malfunction.
• Use a rated power of 220-240 V~, 50 Hz.
• Install the product while the power cord is unplugged.
WARNING
• Use a power outlet with a maximum allowable current of 16 A. (The maximum current for this dish
washer is 11 A.)
• When powering the dishwasher, ensure that your power supply has:
- An 220-240 V~, 50 Hz fuse or circuit breaker.
- An individual branch circuit serving your dishwasher.
• After the installation, check if the power cord is not bent or damaged.
• Ensure that the water supply valve is turned off before connecting the water supply line to the
dishwasher.
• Seal the water supply line connections using teflon tape or sealing compound to stop any water
leakage.
DW60M5070IB_ET_DD81-02615K-00_EN.indd 35 DW60M5070IB_ET_DD81-02615K-00_EN.indd 35
cabinet
Dishwasher Dishwasher
Door of Door of
Dishwasher Dishwasher
Minimum space
of 50 mm
Installing your dishwasher _35
2019-09-17 2019-09-17 2:50:44 2:50:44