Rs232 Commands; Signal Switching; Control Of The Source Devices - Kindermann HDMI Switch 41 automatic 4K60 Inbetriebnahme- Und Bedienungsanleitung

6.4.1 RS232 commands

As soon as the status of the HDMI Switch 41 automatic 4K60 changes (e. g. by pressing a button), the
last change is automatically displayed via RS232 command.
Note: All commands can be terminated with "<CR>" or without. Both are recognized.
Answers are always terminated with "<CR>".

6.4.2 Signal switching

Command
1B1.
2B1.
3B1.
4B1.
?B1.
B1 Auto On
B1 Auto Off
B1 Auto?

6.5 Control of the source devices

Note:
• The connected source device must support CEC.
• HDMI input 4 does not support CEC!
Command
SRC PWR On
SRC PWR Off
SRC PWR?
SRC Play
SRC Pause
SRC Stop
SRC FForward
SRC FBackward
Function
Switches to HDMI input 1
Switches to HDMI input 2
Switches to HDMI input 3
Switches to HDMI input 4
Input Query
Activating the automatic switching mode
Activating the manual switching mode
Shows the current switching mode
Function
Switch on the input source device,
e. g. Blue-ray/DVD-player
Switch off the input source device,
e. g. Blue-ray/DVD-player
Source device power status request
Play
Pause
Stop
Fast Forward x1
Fast Rewind x1
Example answer
AV: 1  1
AV: 2  1
AV: 3  1
AV: 4  1
AV: x  1 (x: 1,2,3 or 4)
B1 Auto: On
B1 Auto: Off
B1 Auto: On
B1 Auto: Off
Example answer
SRC: PWR On
SRC: PWR Off
SRC: PWR On
SRC: PWR Off
SRC: Play
SRC: Pause
SRC: Stop
SRC: FForward
SRC: FBackward
22