Keysight U1253B Kurzanleitung Seite 9

Downloaded from www.Manualslib.com
Measuring DC voltage
For measuring DC voltage from a mixed signal in DC
NOTE
measurement mode, ensure that the Filter is
enabled.
1 Set the rotary switch to
that
2 Connect the red and black test leads to input
terminals V. mV (red) and COM (black)
respectively.
3 Probe the test points and read the display.
4 Press
Parameter can be switched consecutively.
Keysight U1253B Quick Start Guide
manuals search engine
or
is shown on the display.
to display dual measurements.
. Ensure
9