Keysight U1253B Kurzanleitung Seite 10

Downloaded from www.Manualslib.com
Using the Filter
1 Press and hold
to enter the multimeter's Setup menu.
2 Press
3 Press
option.
4 Press
5 Press
6 Press
your changes and exit the Ed it mode.
7 Press and hold
and returns to its normal operating mode.
To avoid possible electric shock or personal injury,
CAUTION
enable the Filter to verify the presence of hazardous
DC voltages. Displayed DC voltages can be
influenced by high frequency AC components and
must be filtered to assure an accurate reading.
10
manuals search engine
for more than 1 second
or to scroll to menu 6.
or to browse to the DC Filter
to enter the Ed it mode.
or to enable the DC Filter.
for more than 1 second to save
until the meter restarts
Keysight U1253B Quick Start Guide