Charging The Battery - Keysight U1253B Kurzanleitung

Downloaded from www.Manualslib.com

Charging the Battery

It is strongly recommended that you use the
specified 24-volt DC adapter included as an
accessory to charge the rechargeable battery.
1 Remove the test leads from the multimeter
and turn the rotary switch to
2 Plug the DC adapter into a power outlet.
3 Insert the red (+) and black (–) banana plugs
(4 mm plugs) of the DC adapter to the
and
the polarity of the connection is correct.
4 The display will show a countdown timer of
10 seconds for the self-test to start. The
multimeter will output short single-tone
sounds to remind you to charge the battery.
Press
the multimeter will automatically start
4
manuals search engine
terminals respectively. Ensure that
to start charging the battery, or
Keysight U1253B Quick Start Guide
.