Double-Sided Smooth Grind - Silvercrest SEMS 12 A1 Benutzerhandbuch

Double-sided smooth grind

■ 8 │
Downloaded from www.Manualslib.com
For a double-sided grind, the blade of the knife is sharpened from both sides
toward the cutting edge. Smooth grind is characterised by the knife's smooth
blade, meaning no waves or notches are ground in it.
NOTES ON THE HANDLING OF THE APPLIANCE
► Prevent that the blade cuts into the plastic housing of the appliance when it
is pulled through.
Accidental cuts into the housing, however, do not compromise the functioning
of the appliance.
► To sharpen knives with ceramic blades, use only sharpening base 2
For this purpose, follow the instructions starting from step 3).
► Use the two slits of sharpening base 1
purpose, follow the instructions starting from step 1).
1) Always hold the appliance with your left hand.
2) Hold the knife at the handle and pull the blade in a steady movement once
through the left and once through the right slit of sharpening base 1
Exert slight pressure when sharpening in the direction of the sharpening
stone to ensure even contact with the knife.
NOTE
► Very dull knives might have to be pulled through more than once.
GB │ IE
manuals search engine
only for very dull knives. For this
SEMS 12 A1
.
.