Specifications - Siemens SITRANS Probe LU Kurzanleitung

SITRANS Probe LU
WARNING: Changes or modifications not expressly approved by Siemens
could void the user's authority to operate the equipment.
Notes:
•
•
SITRANS Probe LU is a loop-powered continuous level monitor, using advanced ultrasonic
techniques. The unit consists of an electronic component coupled to the transducer and
process connection.
The transducer is available in ETFE (ethylene-tetrafluoroethylene) or PVDF (polyvinylidene
fluoride), allowing SITRANS Probe LU to be used in a wide variety of industries and
applications using corrosive chemicals.
The ultrasonic transducer contains a temperature sensing element to compensate for
temperature changes in the application.
Communication is via HART

Specifications

For a complete listing, see the SITRANS Probe LU Instruction Manual. For Approvals
information, please refer to the device nameplate.
Ambient/Operating Temperature
Note:
on the product nameplate. The reference drawing listed on the nameplate can be
downloaded from the Siemens website. Go to the product page at:
www.siemens.com/probelu.
process temperature:
–40 to +85 °C (–40 to +185 °F)
1.
HART® is a registered trademark of the HART Communication Foundation.
Page EN-2
Downloaded from www.Manualslib.com
SITRANS Probe LU is to be used only in the manner outlined in this manual,
otherwise protection provided by the equipment may be impaired.
This product is intended for use in industrial areas. Operation of this equipment in a
residential area may cause interference to several frequency based
communications.
1
, and signals are processed using Sonic Intelligence®.
Process temperature and pressure capabilities are dependent upon information
hand programmer
ambient temperature
surrounding enclosure:
–40 to +80 °C (–40 to +176 °F)
SITRANS Probe LU (HART) – QUICK START MANUAL
manuals search engine
product nameplate
flange adaptor
customer-
supplied flange
A5E32168031