Repairs; Decommissioning, Storage And Disposal; Decommissioning; Storing The Device - HEYLO DE2XS Betriebsanleitung

Electric heater DE2XS
21

Repairs

The following section describes who may repair the
device and how it can be repaired.
NOTICE
Repairs may only be carried out by staff authorised
by the manufacturer during the warranty period of
the device.
Repairs performed by the company
operating the device
After the statutory warranty has expired, repairs may
be carried out by the company operating the device,
provided appropriate expertise is shown. HEYLO will
not assume any liability for these repairs.
Contact the HEYLO service department or your
dealer if you have any questions about repairs.
See also
 Contacting HEYLO GmbH
22

Decommissioning,

storage and disposal
The following principles apply for the decommission-
ing, storage and disposal of the device:
DANGER
Danger to life due to electric shock
Touching electrically live parts can be fatal.
a) Switch off the device and pull out the mains
plug.
32 / 34
[ 21]
22.1 Decommissioning
Temporary decommissioning
Operating mode
a) Move the
0 position.
b) Clean the device (see Cleaning and mainte-
nance [ 31]).
 The device has now been temporarily decom-
missioned.
Final decommissioning
✓ Carry out all the steps needed for temporary
decommissioning.
a) Disconnect all the incoming and outgoing lines
(power supply lines).
 You have now taken the device permanently out
of service.
See also
 Contacting HEYLO GmbH
22.2

Storing the device

Store the device dry and free of frost.
See also
 Operating conditions
22.3

Disposal

The device is largely made of recyclable materials. It
does not represent any danger to the operator and
the environment when handled properly. However,
operation of the device may lead to the generation of
waste and waste water containing harmful and/or
environmentally hazardous substances (air filters).
These materials must be disposed of properly in
accordance with the regulations.
The individual components of the device (e.g. metal
components, etc.) must be taken to a qualified dis-
posal and recycling company. Appoint a qualified,
rotary selector to the
[ 21]
[ 24]
EN