Inhaltsverzeichnis
Werbung
Instructions or recommendations appearing in the various technical advice notes and manufacturer's service manuals should be
followed precisely; please contact our Technical Department for any additional information.
CLEANING
Coils should preferably be cleaned with:
Compressed air
-
By brushing with non-metallic materials
-
With clean water spray (3 bars maximum at a distance of 1.5m). Avoid
-
The electrical supply will have to be switched off during this operation..
Avoid all aggressive detergents which may cause eventual corrosion.
FAN MOTOR CHANGE
This operation can only be undertaken once the electrical supply has been switched off (consignation).
spraying motors with water.
24/34
Werbung
Inhaltsverzeichnis
