Operating Tips; Setting The Temperature; Alarm Functions - Siemens GSN Serie Gebrauchsanleitung

Operating tips

After the appliance has been switched
■
on, it may take several hours until
the set temperature has been
reached. Do not put any food
in the appliance beforehand.
The fully automatic NoFrost system
■
ensures that the freezer compartment
remains free of ice. Defrosting is not
required.
The sides of the housing are
■
sometimes heated slightly. This
prevents condensation in the area
of the door seal.
If the freezer compartment door
■
cannot be immediately re-opened after
it has been closed, wait until
the resulting low pressure has
equalised.
Setting
the temperature
Fig. "
Freezer
The temperature can be set from -16 °C
to -26 °C.
Keep pressing temperature setting
button 3 until the required freezer
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on temperature
display 4.

Alarm functions

Fig. "
Door alarm
A warning signal is switched on if the
appliance door is left open for a while.
Close the door to switch off the warning
signal.
Thaw alarm
When the alarm button 5 is pressed,
the temperature display indicates for five
seconds the warmest temperature
reached in the freezer compartment.
Then this value is deleted.
The display 4 indicates the set freezer
compartment temperature without
flashing.
Henceforth the "warmest temperature"
will be redefined and saved.
Temperature alarm
The temperature alarm switches on
if the freezer compartment is too warm
and the frozen food is at risk of thawing.
The temperature display 4 flashes
and the alarm button 5 is lit.
The alarm may switch on without any risk
to the frozen food:
when the appliance is switched on,
■
when large quantities of fresh food are
■
placed in the appliance,
if the freezer compartment door is
■
open too long.
en
31