Lcd Desciption; Connect Charger To Power Outlet - VOLTCRAFT CC-8 Bedienungsanleitung

9. LCD desciption

Display Display
A flashing indicates that charging is in progress. The number
indicates which slot(s) is/are active.
Li-ion
Lithium-ion battery inserted
LiFePO4 Lithium iron phosphate battery inserted
NiMH: Nickel metal hydride battery inserted.
NiMH/NiCd
NiCd: Nickel-cadmium battery inserted
V
Battery voltage
Null
Battery not connected
Full Battery is fully charged
Err Battery polarity is reversed, non-rechargeable battery inserted.
mAh
Battery capacity
%
Percentage charged
A Charging current

10. Connect charger to power outlet

When not using the device, disconnect the charger from the power supply and remove any inserted batter-
ies.
• Connect one end of the adaptor to the power input (8) on the charger, and the other end to a suitable power supply.
• The LCD display (2) will light up to indicate the charger is receiving power.
• If no batteries are inserted, the LCD display will show Null.
21