Access Control Functions; Info. Functions (Arm/Disarm) - Honeywell IDENT-KEY 3 Bedienungsanleitung

Operating Manual IK3 Operating Unit with Keypad
8.4

Access control functions

The type of AC functions is defined in the programming of the central control unit/EU. Optical and
acoustical acknowledgement is identical after an action has been performed.
1. Only IK data carrier
2. Only PIN
3. With IK data carrier and PIN
or
With PIN and IK data carrier
Acknowledgement:
Optical
Acoustical
(signal)
Action
8.5 Info functions
The function "Info" indicates the current state of the zone
carrier/PIN is authorized for arming/disarming, the LED "Alarm" will be activated.
For authorization with PIN and/or IK data carrier, see above.
Call info.
Indicator: Optical
IK-D
0....9
IK-D
0....9
0....9
IK-D
With authorization
Ready
(green)
2 sec.
Positive acknowledg.
Door lock release
i
System is disarmed
Ready
(green)
Disarmed
(yellow)
Alarm
Lights up in case
(red)
of alarm
Hold the IK data carrier in the reading range,
acknowledgement follows.
Enter PIN, acknowledgement follows
Hold the IK data carrier in the reading range,
"Ready" flashes 1x
(if no authorization, negative acknowledgement)
Enter PIN, acknowledgement follows
Enter PIN, LED "Ready" flashes 1x
(if no authorization, negative acknowledgement)
Hold the IK data carrier in the reading range,
acknowledgement follows.
No authorization or
AC function not activated
5 sec.
Negative acknowledg.
No door lock release
(armed / disarmed / alarm). Only if the data
Activate the " " key i
5 sec.
5 sec..
System is armed
5 sec.
Off
Lights up in case
of alarm
25