Bosch KGN Serie Gebrauchsanleitung Seite 41

To implement settings with Home
■
Connect, the Home Connect app
must be installed on your mobile
device.
Observe the supplied Home
Connect documents for this.
Follow the steps specified by the
app to implement the settings.
The Home Connect menu will close
■
automatically when the appliance is
not operated for a lengthy period of
time. You can find information on
how to open the Home Connect
menu at the start of the appropriate
sections.
Automatic connection with the home
network (WLAN)
If a WLAN router withWPS function is
available, the refrigerator can
automatically connect to the home
network.
Press the alarm off button.
1.
The refrigerator compartment
temperature display shows Cn.
Press button + refrigerator
2.
compartment until the refrigerator
compartment temperature display
shows AC and the freezer
compartment temperature display
shows OF.
Press button + freezer compartment.
3.
The appliance is ready for the
automatic connection.
The energy saving mode display
flashes.
Freezer compartment temperature
display shows an animation for 2
minutes.
The appliance is ready for the
automatic connection for as long as
the animation is displayed.
Within those 2 minutes, activate the
4.
WPS function on the home network
router (e.g. using the
WPS/WLANbutton; observe
information on this topic in the router
documentation).
If the connection is successful, the
freezer compartment temperature
display shows On and the energy
saving mode display lights up.
The refrigerator is ready to connect
with the app.
If the freezer compartment
Note:
temperature display shows OF, no
connection could be established.
Check whether the refrigerator is
1.
located within the range of the home
network (WLAN).
Repeat the process or establish the
2.
connection manually.
Manual connection with the home
network (WLAN)
If the WLAN router present does not
have aWPS function, or if this is
unknown, you can manually connect the
refrigerator with the home network.
Press the alarm off button.
1.
The refrigerator compartment
temperature display shows Cn.
Press button + refrigerator
2.
compartment until the refrigerator
compartment temperature display
shows SA and the freezer
compartment temperature display
shows OF.
Press button + freezer compartment.
3.
The appliance is ready for the
manual connection.
The energy saving mode display
flashes.
The freezer compartment
temperature display shows an
animation.
The appliance is ready for the
manual connection for as long as
the animation is displayed.
The refrigerator has now set up its
4.
own WLAN network with the network
name "HomeConnect".
You can now access this network
with your mobile device.
Call up the WLANsettings in the
5.
settings menu of the mobile device.
Home Connect en
41