Before Using Your Appliance For The First Time; Electrical Connection - Bosch KGN Serie Gebrauchsanleitung

Using the appliance
Vacuum the back of the appliance once a year.
Do not cover or block the ventilation openings.
--------
Before using your appliance
for the first time
Remove leaflets, adhesive tape and
1.
protective film.
Clean the appliance.
2.
~ "Cleaning" on page 49

Electrical connection

Caution!
Do not connect the appliance to
electronic energy saver plugs.
You can connect the appliance
Note:
to mains-controlled and sine-controlled
inverters.
Mains-controlled inverters are used for
photovoltaic systems which are
connected directly to the national grid.
Sine-controlled inverters must be used
for isolated applications. Isolated
applications, e.g. on ships or in
mountain lodges, which are not
connected directly to the national grid.
Installation and connection en
The air on the rear panel of the appliance does not
warm up so intensely. The appliance consumes less
power if the warm air can escape.
After installing the appliance, wait at
1.
least 1 hour before connecting it to
prevent damaging the compressor.
Connect the appliance via a
2.
correctly installed socket.
The socket must comply with the
following data:
Socket with
Conductor
Fuse
Outside Europe: Check whether the
indicated current type of the
appliance corresponds with the
values of your power supply.
Appliance specifications are on the
rating plate.
~ "Getting to know your appliance"
on page 36
Connect the appliance to a socket
3.
near the appliance.
The socket must be freely
accessible even after the appliance
has been installed.
220 V ... 240 V
50 Hz
10 A ... 16 A
35