Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Functions in DMX mode
1-channel mode
Channel
CH1
2-channel mode
Channel
CH1
CH2
3-channel mode
Channel
CH1
CH2
CH3
CLEANING AND MAINTENANCE
The outside of the device should be cleaned periodically to remove contaminants such as dust etc. The lens,
in particular, should be clean to ensure that light will be emitted at maximum brightness.
1
Disconnect the device from power and allow it to cool before cleaning.
2
Clean the surface with a soft lint-free and moistened cloth. Never use alcohol or solvents as these may
damage the surface. Make sure that no liquids can enter the device.
3
The device must be dry before reapplying power.
There are no serviceable parts inside. Do not open the housing. Do not try to repair the device by yourself as
this may result in damage. Maintenance and service operations are only to be carried out by authorized
dealers. Should you need any spare parts, please use genuine parts. Should you have further questions,
please contact your dealer.
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
1
Disconnect the device from power and allow it to cool.
2
Open the fuse holder of the mains connection with a fitting screwdriver.
3
Remove the old fuse from the fuse holder and replace it with a new fuse.
4
Carefully push the fuse holder back into its position before reapplying power.
Downloaded from
www.Manualslib.com
Function
Master dimmer
Function
Master dimmer
Strobe
Function
Master dimmer
Fine dimmer
Strobe
manuals search engine
Value
Details
000 – 255
Total brightness 0-100%
Value
Details
000 – 255
Total brightness 0-100%
000 – 015
LED on
016 – 095
Strobe effect (1-25 Hz) with increasing speed
096 – 175
Pulse effect (1 Hz) with decreasing pulse width
176 - 255
Random strobe effect with increasing speed
Value
Details
000 – 255
Total brightness 0-100%
000 – 255
Fine dimmer (16 bit) 0-100%
000 – 015
LED on
016 – 095
Strobe effect (1-25 Hz) with increasing speed
096 – 175
Pulse effect (1 Hz) with decreasing pulse width
176 – 255
Random strobe effect with increasing speed
21/24
00117370, Version 1.0
Werbung
Inhaltsverzeichnis
