Pando PHV9400 Gebrauchsanweisung Seite 101

Safety Instructions
 Do not lean or sit on the open oven door. This may damage the oven,
especially in the hinge zone. The door can bear a maximum weight of 8 kg.
 The grills can bear a maximum load of 8 kg. To avoid damaging the oven,
do not exceed this load.
INSTALLATION
 The electrical installation is to be set up so that the appliance can be
isolated from the mains with a minimum 3mm all-pole contact separation.
 Suitable separation devices include e.g. cutouts, fuses (screw fuses are to
be taken out of the holder), RCD's and contactors. This installation must
comply with current regulations.
 If the electrical connection is done through a plug and this remains
accessible after installation, then it is not necessary to provide the
mentioned separation device.
 Protection against electric shock must be provided by the electrical
installation
 Warning: The oven must be earthed.
CLEANING
 The appliance should be cleaned regularly and any food deposits removed.
 Failure to maintain the appliance in a clean condition could lead to
deterioration of the surface that could adversely affect the life of the
appliance and possibly result in a hazardous situation.
 Do not use harsh abrasive cleaners or sharp metal scrapers to clean the
glass door since they can scratch the surface, which may result in shattering
of the glass.
 Do not use a steam cleaner to clean the appliance.
 Please follow the instructions regarding cleaning in the section "Oven
Cleaning and Maintenance".
REPAIRS
 WARNING: Before maintenance cut the power supply.
 If the power cable is damaged it should be substituted by the manufacturer,
authorized agents or technicians qualified for this task in order to avoid
dangerous situations. Furthermore, special tools are required for this task.
 Repair and maintenance work, especially of current carrying parts, can only
be carried out by technicians authorized by the manufacturer.
EN
3