On/Off Switch; Technical Specifi Cations; Safety Information; Symbols In The Instructions - Parkside PBS 2 B2 Originalbetriebsanleitung

IE NI

20 On/off switch

The on/off switch switches off the en-
gine. It must be in position
to restart the engine.
13 Protective covers
Protect the operator from accidental
contact with the cutting tool and foreign
bodies being thrown out.Fremdkörpern.
Technical Specifi cations
Petrol grass trimmer ................... PBS 2 B2
Engine ............................ 2-stroke engine
Fuel Mix .........................................40:1
Engine capacity ........................42.7 cm³
Max. engine power P
Engine tick over speed ............. 3000 rpm
Max. cutting speed
With blade; Ø 255 mm ...... 7850 min
With thread spool; Ø 430 mm ......6750
min
-1
Tank contents/
Tank capacity ......... 1200 ml / 1200 cm³
Weight (empty tank) ..................... 7.1 kg
Weight (motor unit) ...................... 6.4 kg
Threads
Cutting radius .........................430 mm
Thread thickness ......................2.4 mm
Thread length ............................... 6 m
3-/4-tooth blade
Cutting circle/diameter ............255 mm
Thickness ..............................1.4 mm
Bore hole ..............................25.4 mm
Max. rotational speed ...... 10500 min
Sound pressure level
) ..................93.0 dB(A), K
(L
pA
Sound power level (L
Guaranteed ......................... 112 dB(A)
Measured . 109.8 dB(A); K
) ..... 9.210 m/s
Vibration (a
h
The vibration values were determined in
accordance with ISO 22867.
8
in order
1.35 kW (1.8 HP)
max
= 3 dB
pA
)
WA
= 2.57 dB
WA
; K=1.5 m/s
2
The noise emissions were determined in
accordance with ISO 22868.
Levels of noise were determined according
to the norms and regulations in the decla-
ration of conformity.

Safety Information

In order to be able to operate the
equipment safely, all instructions
and information in the operating
instructions about safety, assembly
and operation must be followed
precisely. Anyone operating or
maintaining this equipment must be
familiar with the operating instruc-
tions and informed of potential haz-
-1 ards.

Symbols in the Instructions

Warning signs with details
for the prevention of person-
al and property damage.
Hazard symbol with infor-
mation on the prevention of
personal injury or property
damage through fi re or
explosion
Command signs (instead of the
exclamation mark, the command is
-1
explained) with details for the pre-
vention of damage.
Read the instruction manual carefully
before using the device.
2
Wear gloves.