Intended Use; General Description; Delivery Contents; Functional Description - Parkside PBS 2 B2 Originalbetriebsanleitung

IE NI
The operating instructions constitute
part of this product. They contain
important information on safety, use
and disposal.
Before using the product, familiarise
yourself with all of the operating
and safety instructions. Use the prod-
uct only as described and for the
applications specifi ed.
Keep this manual safely and in the
event that the product is passed on,
hand over all documents to the third
party.

Intended Use

The petrol strimmer is intended for cutting
grass in the garden, along fl ower beds,
around trees or fence posts, and light un-
dergrowth.
Any other use not explicitly authorised in
these instructions may result in damage to
the equipment and represent a serious haz-
ard to the user.
The equipment is not designed for cutting
bushes, small trees or similar plants. The
equipment is intended for use by adults.
Young people over the age of 16 may use
the equipment only under supervision.
The manufacturer is not liable for damages
caused by use other than for the intended
purpose or by incorrect operation.
This equipment is not suitable for commer-
cial use. Commercial use will invalidate the
guarantee.

General Description

The illustration of the principal
functioning parts can be found
on the front and back foldout
pages.
6

Delivery Contents

Start by unpacking the equipment and
check that it is complete. Dispose of the
packaging material correctly.
• Engine housing with upper shaft tube
and unmounted multifunction handle
• Lower shaft tube
• Thread spool
• 3-toothed blade
with transport protection
• 4-toothed blade
with transport protection
• Protective cover
• Carrying harness with hip protector
• Service key
• 2 x hexagon socket wrench,
4 mm & 5 mm
• 3 x cable holder (already fi tted)
• Assembly materials
• 500 ml oil/petrol mixing bottle
• Accessory bag
• Instruction Manual

Functional Description

The hand-operated and portable PBS 2 B2
petrol strimmer features a combustion
engine to drive the blades, which is in
operation without interruption while in use.
The power is transmitted via a clutch disc,
which uses a high-revolution centrifugal
clutch to transfer the engine output to the
strimming unit.
In the cutting process, two plastic wheels ro-
tate about an axis vertical to the cutting level.
A 3- or 4-toothed blade can be mounted as
an alternative to the double thread spool.
To protect the user, the equipment has a
protective device, which covers the cutting
device.
Please refer to the descriptions below for
how the operating parts work.