College Park odyssey k2 Technische Anleitung Seite 4

MOUNTING
Use only high quality endoskeletal components.
ASSEMBLY AND DISASSEMBLY
Use the FootHorn to don and doff the foot shell. Remove the CPI Sock and replace as needed. Any
further disassembly or modification of components will void the warranty.
HYDRAULIC RANGE
The Odyssey foot has 12º of hydraulic motion. The foot is designed to provide 1º hydraulic
K2
dorsiflexion from the neutral standing position. This is intended
to prevent midstance drift; the sensation of user instability
(lacking toe support) during standing.
The foot was developed utilizing a flexible composite base. As
a result, a typical user will experience an additional range of
dynamic motion during ambulation.
Note: Excessive angular adjustment will affect the hydraulic
range of the foot. After making an alignment change, ensure
that the user retains 1º of hydraulic dorsiflexion.
BENCH ALIGNMENT
The weight line should divide the foot at 1/3 heel lever to 2/3 toe
lever. It will fall just anterior of the pyramid.
1 | Odyssey ENGLISH
K2
PACKAGE CONTENTS
(1) Odyssey
K2
(1) Foot Shell
(1) CPI Sock
TOOLS RECOMMENDED
3mm Hex Key
4mm Hex Key
FootHorn
(for sock replacement)
Hydraulic Range
1.0 cm
1.0 cm
Foot
11° 1°
⁄ ⁄