Technical Data; Specified Conditions Of Use; English - Gude MIG 155/6 W Originalbetriebsanleitung

Technical Data

Welder
Art. No
Degree of protection
Insulation class
Rated input voltage (AC Current) U
Mains frequency
Protection, time delay
No-load voltage U
0
Load voltage U
2
Welding current I
2
Switch-on time X *
max. Welding current (230 V)
Regulated section Welding current
Max. input (230 V)
Maximum rated input current I
Maximum effective input current I
Number of switching steps
Material thickness
Wire thickness
Hose package length
Dimensions L x W x H
Net/gross weight
* The ratio of given duration time/the full-cycle time.
Note 1: This ratio shall be within 0~1, and can be indicated by percentage.
Note 2: In this standard, the full-cycle time is 10 min. For example, if the duty cycle is 60 %, the load-applying
time shall be 6 min and the following no-load time shall be 4 min.
Switch-on time determined at 40°C using simulation
Read and understand the operating
instructions before using the appliance. Familiarise
with the control elements and how to use the
appliance properly. Abide by all the safety measures
stated in the service manual. Act responsibly toward
third parties.
The operator is responsible for accidents or risks to
third parties.
In case of any doubts about connection and operati-
on refer please to our customer center
1
15,25 V 16 V
25 A 40 A
100 %
1max
1eff

Specified Conditions of Use

Protective gas welding device for the thermal con-
nection of ferrous metals by melting the edges and
feeding in an additive.
Only wire electrodes which are suitable for the
device may be used.
Observing the safety instructions, the assembly in-
structions and the operating instructions in the user
manual also constitutes part of the proper use.
16,6 V 17,75 V 18,5 V
52 A 75 A 90 A
60 % 30% 20 %

ENGLISH

23
MIG 155/6W
20072
IP 21S
H
230 V
50 Hz
16 A
36 V
20 V
120 A
10 %
120 A
25-120 A
5,7 kVA
25 A
10 A
6
1 - 6 mm
0,6 - 0,8 mm
2,8 m
660 x 330 x 450
mm
25 kg / 29,4 kg