Use And Handling Of The Cordless Electrical Power Tool - Parkside PASD 4 A1 Originalbetriebsanleitung

5. Use and handling of the cordless electrical
power tool
a) Charge a rechargeable battery using only the charger recom-
mended by the manufacturer. Chargers are often designed for
a particular type of rechargeable battery unit. There is the
danger of fire if other types of rechargeable battery units are
used.
b) Only the rechargeable battery units supplied are to be used
with an electrical power tool. The use of other rechargeable
battery units may lead to the danger of injury or fire.
c) When they are not being used, store rechargeable battery
units away from paperclips, coins, keys, nails, screws or other
small metal objects that could cause the contacts to be
bridged. Short-circuiting the contacts of a rechargeable battery
unit may result in heat damage or fire.
d) Fluids may leak out of rechargeable battery units if they are
misused. If this happens, avoid contact with the fluid. If contact
occurs, flush the affected area with water. Seek additional
medical help if any of the fluid gets into your eyes. Escaping
battery fluid may cause skin irritation or burns.
e) Do not use damaged or modified batteries. Damaged or
modified batteries may behave unexpectedly and cause fires,
explosions or pose a risk of injury.
f) Do not expose a battery to fire or excessively high tempera-
tures. Fire or temperatures in excess of 130°C (265°F) can
cause an explosion.
g) Follow all instructions regarding charging and never charge the
battery or the cordless tool outside of the temperature range
given in the operating instructions. Incorrect charging or charging
outside of the permissible temperature range can destroy the
battery and increase the risk of fire.
│ GB │ MT
■ 90
PASD 4 A1