Use; Switching The Cordless Screwdriver On/Off; Torque Selection Ring - Parkside PASD 4 A1 Originalbetriebsanleitung

Inserting
♦ Insert an insulated bit
Removal
♦ Pull the insulated bit

Use

Switching the cordless screwdriver on/off
Switching on
♦ To start the cordless screwdriver, press and hold either the
rotation direction switch: right ▲
switch: left ▼
The LED lamps
Switching off
♦ To stop the cordless screwdriver, simply let go of the rotation
direction switch: right ▲
left ▼ . The LED lamps

Torque selection ring

You can set the torque on the torque selection display
torque selection ring
♦ Select a low level for small screws or soft materials.
♦ Select a high level for large screws, hard materials or removing
screws.
PASD 4 A1
into the tool holder
out of the tool holder
.
light up.
or the rotation direction switch:
go out.
.
.
.
or the rotation direction
GB │ MT
using the
│
95 ■