Lightmaxx CLS FX Laser Bar PRO Bedienungsanleitung Seite 36

Menu Structure in Detail:
LED Display
AutP  AP01 - AP18
AutL  AL01 - AL06
AutF  AF01 - AF12
Aut
AutM  AM01 - AM03
S.01 - S.99
M.00 - M.99
SutP  SP01 - SP18
SutL  SL01 - SL06
Sou
SutF  SF01 - SF11
SutM  SM01 - SM03
COLO
COL R/G/BXXX
S.00 - S.99
d001
DMX 03/05/10/28 CH
dXXX
SLA SLAV
Adds
LEDs
TEST
SYS
REST
WIFI
Description
PAR Light Auto Mode
Laser Light Auto Mode
(AF01 - AF10 White Strobe, AF11 UV Strobe, AF12 UV ON)
Mix Auto Mode
Effect Speed adjustment; 01 is the lowest, 99 is the fastest
Motor Speed adjustment; 00: motor stops, 99 is the fastest
PAR Light Sound Mode
Laser Light Sound Mode
(SF01 - SF10 White Strobe, AF11 UV Strobe)
Mix Sound Mode
Color manual adjustment
LED color setting
Flash Light Speed adjustment; S.00: All on, S.99 is the fastest
Signal reception mode (the worlds will strobe if there's no signal)
03CH (d001-d510), 05CH (d001-d508), 10CH (d001-d503),
28CH (d001-d485)
Channel adress setting
Slave mode
Machine position setting: *234; 1*34; 12*4; 123*
LED display power-saving mode
Testing mode:
(1) functional testing mode: auto/sound program, testing for 30s;
when there's sound, running sound program; when no sound,
running auto mode; to check if the LED chips are OK. And the
IR remote control testing, press ON/OFF, blackout operation, to
check if the IR remote control is OK.
(2) Aging testing: all the LED chips, motor work at the max,
power, LED display shows 8.8.8.8.
Restore the factory initial setup
Wireless pedal working mode