Connections And Control Elements - Lightmaxx CLS FX Laser Bar PRO Bedienungsanleitung

Connections and Control Elements:

Number Description
1
Laser
2 LED Strobe
3 Microphone
4
IR Sensor
5 Power Connection (IEC Out)
6 Power Connection (IEC In)
Operation:
Start:
Connect the device to the power supply and wait a few seconds until it is ready for operation.
Menu:
Navigation in the menu is performed using the four menu buttons below the display. Use the
„Menu" key to activate the menu, navigation is via the „Up" and „Down" keys. A correspon-
ding selection is confi rmed with the „Enter" key.
Number Description
7
DMX IN/Out (3-pole)
8 Antenna
9 Potentiometer
10
Display
11 Remote Control Switch
12 Key switch