Seite 2
DEUTSCH Wichtige Sicherheitshinweise! Bitte vor Anschluss lesen! GEFAHR! (Elektrischer Schlag durch hohe Spannungen im Gerät) Das Gehäuse darf nicht entfernt werden! Es befinden sich keine zu wartenden Teile im Gerät. Im Geräteinneren befinden sich Bauteile, welche unter hoher elektrischer Spannung stehen. Überprüfen Sie das Gerät vor jeder Nutzung auf Beschädigungen oder das Fehlen von Komponenten, Schutzvorrichtungen oder Gehäuseteilen.
Seite 3
DEUTSCH Hinweis! (Brandgefahr durch Überhitzung) Die maximal zulässige Umgebungstemperatur dieses Gerätes beträgt 40°C. Stellen Sie sicher, dass das Gerät an einem Ort mit ausreichender Belüftung platziert wird, außerhalb der Reichweite von direkten Wärmequellen, offenem Feuer und brennbaren Materialien und Flüssigkeiten. Ein Mindestabstand von 1 m ist hier zwingend erforderlich. Die Lüftungsschlitze des Geräts dürfen nicht abgeklebt, noch darf das Gerät abgedeckt werden.
Seite 4
DEUTSCH Symbole auf Gerät und Verpackung: Das Blitzsymbol warnt den Nutzer vor nicht isolierter Spannung und der Gefahr eines Stromschlages. Das Ausrufezeichensymbol weist den Nutzer auf wichtige Wartungs- sowie Bedienungshinweise in der Bedienungsanleitung hin. Nur für den Innenbereich geeignet Dieses Symbol legt den minimalen Abstand des zu beleuchtenden Objektes fest. Bedienungsanleitung lesen Bitte lesen Sie die Warnhinweise und Empfehlungen sorgfältig durch und befolgen Sie diese, um einen gefahr- und reibungslosen Gebrauch zu gewährleisten.
Bedienungsanleitung Bestimmungsgemäßer Gebrauch: Das Produkt LightmaXX Vega Strobe 600 wurde für den Einsatz als elektronischer LED- Beleuchtungseffekt konzipiert. Das Gerät darf ausschließlich zu diesem Zwecke und im Sinne der Bedienungsanleitung betrieben werden. Andere Verwendungszwecke, sowie der Betrieb unter anderen Betriebsbedingungen sind ausdrücklich nicht bestimmungsgemäß und können zu Sach- oder Personenschäden führen! Für Schäden, die aus einer nicht bestimmungsgemäßen...
DEUTSCH Inbetriebnahme: Sämtliche Verbindungen des Gerätes sollten vor dem Einschalten erfolgen. Benutzen Sie für die Verbindungen ausschließlich hochwertige, möglichst kurze Kabel. Konfiguration des DMX Steckers (3-pol) Widerstand 120 Ohm // ¼ W zwischen Pin 2 (DMX-) und Pin 3 (DMX+) der letzten Fixierung. Konfiguration des DMX Steckers (5-pol) Betriebsart DMX: Verbinden Sie den DMX Eingang Ihres Gerätes mit dem DMX Ausgang Ihres DMX-Controllers,...
DEUTSCH Betriebsart Statisch, Auto oder Sound: Das Gerät beinhaltet automatische Programme die nach festen Schemata ablaufen (Auto) oder über das eingebaute Mikrofon passend zur Musik abgerufen werden (Sound). Die Auswahl des jeweiligen Modus erfolgt über das Menü direkt am Gerät. Wenn Sie mehrere Geräte der gleichen Bauart per DMX verbinden, lassen sich diese über das Mastergerät simultan ansteuern.
Seite 11
DEUTSCH Bezeichnung Bezeichnung LEDs DMX-Out (3-pol) Lüfter DMX-In (5-pol) Montagebügel DMX-Out (5-pol) Feststellschrauben Mikrofon für Musiksteuerung PowerCon-Out Display PowerCon-In Menütasten DMX-In (3-pol) Menü: e Na Men er l e er Men as en un er al splays. M er„Menu“- Tas e a eren e as Men e Na...
DEUTSCH Die Menüstruktur im Detail: Hauptmenü Untermenü Wert Funktion <Adress> 000-512 DMX-Adresse einstellen Ligh Menübeleuchtung ausgeschaltet Menübeleuchtung ausgeschaltet <LigtOff> 1Min nach einer Minute Menübeleuchtung ausgeschaltet 2Min nach zwei Minuten Menübeleuchtung ausgeschaltet 3Min nach drei Minuten Menü-Rückkehr ausgeschaltet 1Min Menü-Rückkehr nach einer Minute Menü-Rückkehr nach zwei <MenuBak>...
DEUTSCH Fehlerbehebung: e na l en e en als r e ne s nelle e ler e e un . Sollten Sie sich unsicher sein, kontaktieren Sie den Hersteller, den Händler oder entsprechendes Fachpersonal. Öffnen Sie niemals eigenständig das Gerät! Symptom Fehlerbehebung Überprüfen Sie die Netzverbindung, sowie Ihre...
DEUTSCH Umweltschutz: Die Firma MUSIC STORE professional GmbH bemüht sich stets die Belastung durch Verpackungen auf ein Minimum zu reduzieren. Die Verwendung von umweltfreundlichen und wiederverwertbaren Materialien ist dabei für uns von elementarer Bedeutung. Bitte führen Sie die Verpackungskomponenten nach Gebrauch den entsprechenden Verwertungen zu. Entsorgung von Verpackungen: Sorgen Sie dafür, dass Papierverpackungen, Kunststoffmaterial etc.
Seite 16
DEUTSCH Notizen MS ID: LIG0016277-000 09/2019...
Seite 17
ENGLISH Important safety instructions! Please read before connection! DANGER! (Electrical shock due to high voltages in the device) The housing must not be removed! There are no parts to be maintained in the device. Inside the unit there are components which are under high electrical voltage. Before each use, check the device for damage or the absence of components, protective devices or housing parts.
Seite 18
ENGLISH Hint! (Operating conditions) Due to its structural characteristics, the device is designed for indoor operation (IP20). Never expose the device to rain, moisture or liquids as this may cause damage. Vibrations, dust or sunlight can also cause damage, avoid them! Hint! (Power supply) It is essential that you check that the device voltage matches your local mains voltage.
Seite 19
ENGLISH Symbols on device and packaging: The lightning flash symbol warns the user of uninsulated voltages and the risk of electric shock. The exclamation mark symbol draws the user’s attention to important maintains and operating instructions in the manual. Only suitable for indoor use. This symbol defines the minimum distance of the object to be illuminated.
Manual Intended use: The LightmaXX Vega Strobe 600 was designed for use as an electronic LED lighting effect. The device may only be used for this purpose and in accordance with the operating instructions. Other purposes as well as operation under other operating conditions are expressly not intended and can lead to damage to property or personal injury! No liability is assumed for damage resulting from improper use.
Seite 21
ENGLISH Set up: All connections of the device should be made before switching on. Only use high-quality cables that are as short as possible for the connections. Configuration of the DMX connector (3-pol): Resistance 120 ohm // ¼ w between pin 2 (DMX-) and pin 3 (DMX+) oft he last fixture. Configuration of the DMX connector (5-pol):...
ENGLISH Operating mode DMX: Connect the DMX input of your device to the DMX output of your DMX controller, your DMX software or the DMX output of a device already in your DMX line. Always use a DMX cable with a 110 Ohm resistor for this connection.
Seite 23
ENGLISH 8 Channel-Mode: Channel Value Function Dimmer Close Dimmer 001-255 (dark to bright) 000-004 Strobe Speed Close Strobe Speed 005-253 (slow to fast) Spikes 253-255 (The lamp remains dimly illuminated between flashes) 000-004 Chase Close Chase 005-255 (slow to fast) 000-004 Effect Close 005-046...
Seite 24
ENGLISH Static, Auto or Sound mode: The device contains automatic programs that run according to fixed schemes (Auto) or are recalled via the built-in microphone to match the music (Sound). The selection of the respective mode takes place via the menu directly on the device. If you connect several devices of the same type via DMX, they can be controlled simultaneously via the master device.
Seite 26
ENGLISH Designation Designation LEDs DMX-Out (3-pol) DMX-In (5-pol) Mounting bracket DMX-Out (5-pol) Fixing screws Microphone for Soundmode PowerCon-Out Display PowerCon-In Menu buttons DMX-In (3-pol) Menu: Navigation in the menu is via the four menu buttons below the display. Use the "Menu" button to activate the menu, navigate via the "Up"...
ENGLISH The menu structure in detail: Main menu Submenu Value Function <Adress> 000-512 Setting the DMX Address Ligh Backlight always lit. Backlight <LigtOff> 1Min 1 minute Close Backlight 2Min 2 minute Close Backlight 3Min 3 Minute Close No return 1Min 1 minute returns <MenuBak>...
Seite 28
ENGLISH Exit Exit menu Specifications: Model lightmaXX Vega Strobe 600 Light source 6x 100Watt COB LED Colour mixture White Colour temperature 6500-7200K Flash rate 0-20/Sec. Power consumption 600 Watt Power supply AC 100V-240V, 50/60Hz Connections PowerCon-In/Out, DMX-In/Out (3-pol, 5-pol) DMX, Automatic- and Soundmode,...
Seite 29
ENGLISH Troubleshooting: The following overview serves as an aid for quick troubleshooting. If you are unsure, contact the manufacturer, the dealer or the corresponding specialist personnel. Never open the device on your own! Symptom Troubleshooting No function Check the mains connection and the fuse Check the cable connections Check your DMX address setting No reaction in DMX mode...
Seite 30
ENGLISH Envrionmental protection: The company MUSIC STORE professional GmbH always strives to reduce the burden of packaging to a minimum. The use of environmentally friendly and recyclable materials is of fundamental importance to us. Please dispose of and recycle the packaging components after use properly. Disposal of packaging: Ensure that paper packaging, plastic materials, etc.
Seite 31
ENGLISH Notes MS ID: LIG0016277-000 09/2019...