Using The Appliance - Philips Aluminium HD9160 Bedienungsanleitung

using the appliance

1 Put the plug in the wall socket.
The display and the light ring round the control knob light up.
,
2 Turn the control knob to the preset steaming mode for the type of
food you want to steam.
, The preset steaming time is shown on the display.
For the preset steaming times of the preset steaming modes and tips, see
chapter 'Food table and steaming tips'.
Note: If you want to set a different steaming time than the preset steaming
times on the control knob, select a steaming mode that comes closest to the
desired steaming time. Then use the + and - timer buttons to increase or
decrease the steaming time.
3 Press the START/STOP button.
The steaming process starts and the timer counts down the
,
steaming time.
During the first 5 minutes of the steaming process, the Turbo light
,
lights up. This indicates that the steamer uses the extra power of
the Turbo mode to heat up quickly. You cannot switch off the Turbo
mode during these first 5 minutes.
- If you steam large quantities of food, stir the food halfway through the
steaming process with a kitchen utensil with a long handle. Make sure
you wear oven mitts.
- When the set or preset steaming time has elapsed, the appliance beeps
three times and switches to the keep-warm mode.
4 Carefully remove the lid.
Beware of hot steam that comes out of the appliance when you remove
the lid.
- To prevent burns, wear oven mitts when you remove the lid, the
fish/rice bowl and the steaming bowls. Remove the lid slowly and away
from you. Let condensation drip off the lid into the steaming bowl.
EnglisH
11