Safety System; Electromagnetic Fields (Emf); Before First Use; Using The Appliance - Philips Avent SCF870/21 Bedienungsanleitung

- Switch off the appliance and disconnect from supply before changing
accessories or approaching parts that move in use.
- Take care in handling the sharp blades when emptying the jar and
during cleaning.
- Always disconnect the device from supply if it's left unattended.
- Cleaning and user maintenance shall not be made by children.

Safety system

The appliance is equipped with a built-in safety lock. The appliance only functions if you have
properly assembled all parts on the motor unit. If all parts are assembled correctly, the built-in safety
lock will be unlocked.
The appliance is also equipped with overheat protection. Overheating could occur if the time
between two steaming processes is too short, if the blending function is used too long or if there
are too much ingredients in the jar. If the overheat protection switches off the appliance during
use, set the control knob to 0 and let the appliance cool down for a few minutes. After this, you can
use the appliance again.

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable standards and regulations regarding exposure to
electromagnetic fields.

Before first use

1 Remove all packaging material from the appliance.
2 Clean all parts except the motor unit (see chapter 'Cleaning and maintenance').

Using the appliance

Always check the temperature of the baby food on the back of your hand before you feed
your baby.
Always make sure that the lid has cooled down after steaming before you remove it to add more
ingredients for blending, if necessary. Do not exceed the maximum level indicated on the jar.
Empty the water tank before you refill it to start a new steaming process.
Always make sure that the top edge of the green blade unit is not covered with food when you
start steaming.
Do not exceed the maximum level indicated on the jar (450ml) when you blend liquids.
This appliance is intended for steaming fresh solid ingredients and then blending them to obtain baby
food. See the recipe booklet for some examples. Normally you would first steam the ingredients and
then blend them. However, you can also use the appliance for steaming or blending only. When you
use the appliance for blending only, skip sections 'Filling the water tank' and 'Steaming' and only follow
the instructions in section 'Blending'. After blending, never steam already blended food. Never steam
the same batch of ingredients for longer than 20 minutes or more than once.
This appliance is NOT intended for:
- Defrosting food
- Steaming frozen food
- Steaming already blended food
- Steaming the same ingredients for more than 20 minutes
- Cooking rice and pasta
- Blending ingredients first and then steaming them
- Heating up fluids, e.g. soup or water
ENGLISH
9