Philips Aluminium HD9160 Bedienungsanleitung Seite 17

Problem Possible cause
The steamer does The steamer is not plugged in.
not work.
There is no water in the water
tank.
You have not pressed the
START/STOP button yet.
Not all the food is Some pieces of food in the
cooked. steamer are larger and/or
require a longer steaming time
than others.
You put too much food in the
steaming bowls.
The appliance You have not descaled the
does not heat up appliance regularly.
properly.
The Gentle Steam The control knob has not been
function does not set to the preset steaming mode
work. for fish.
Environment
- Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the environment.
troubleshooting
This chapter summarises the most common problems you could
encounter with the appliance. If you are unable to solve the problem with
the information below, contact the Consumer Care Centre in your country.
Solution
Put the plug in the wall socket.
Fill the water tank.
Press the START/STOP button
Set a longer steaming time with the + button.
Put larger pieces of food and food that
requires a longer steaming time in the small
steaming bowl (2) and start steaming some
time before you add the other bowls.
Do not overload the steaming bowls. Cut the
food into small pieces and put the smallest
pieces on top.
Arrange the food with ample space between
the pieces to enable maximum steam flow.
Descale the appliance. See chapter 'Cleaning
and maintenance'.
Set the control knob to the preset steaming
mode for fish, press the GENTLE STEAM
button and then press the START/STOP
button.
EnglisH
17