Mounting; Mounting The Camera With A Strap - Secacam Raptor Mobile Bedienungsanleitung

10. Mounting

1
10.1

Mounting the camera with a strap

Use the enclosed mounting strap to mount the camera to a tree, a branch
or a pole. Hold the camera in the intended position and pull the loose end of
the strap through the camera's openings as illustrated above and then tight
until the camera is fastened securely. Make sure to hide the remaining part
of the strap.
Trees or poles with a large diameter:
Loop the mounting strap once.
To unfasten the camera, press on the buckle and loosen the mounting strap.
This way you can easily change the cameras position.
64
2
Trees or poles with a smaller diame-
ter: Loop the mounting strap twice
10. Mounting