Options; Settings - IKEA SKINANDE AA-2003812-5 Bedienungsanleitung

ENGLISH

Options

The option must be activated
every time before you start a
programme.
It is not possible to activate or
deactivate the option while a
programme is running.
If the option is not applicable to
a programme, the related
indicator is off or it flashes
quickly for a few seconds and
then goes out.
Activating the option can affect
the water and energy
consumption as well as the
programme duration.
DryPlus
Activate this option to boost the drying
performance.

Settings

Programme selection mode and user
mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
Settings available in the user mode:
• The level of water softener according to
the water hardness.
• Activation or deactivation of the acoustic
signal for the end of a programme.
• Activation or deactivation of the rinse
aid empty notification.
• Activation or deactivation of AutoOpen.
As the appliance stores the saved
settings, there is no need to configure it
before every cycle.
The combination of DryPlus and rinse aid
ensures even better drying results.
DryPlus is a permanent option for all
programmes other than P4 (ECO). It is
automatically activated in next cycles. This
configuration can be changed at any time.
Every time P4 (ECO) is activated,
DryPlus is off and needs to be
chosen manually.
How to activate DryPlus
Press simultaneously
The indicator is on.
The display shows the updated programme
duration.
How to set the programme selection mode
The appliance is in programme selection
mode when the programme indicator
is on and the display shows the
programme duration.
After activation, the appliance is in
programme selection mode by default. If
not, set the programme selection mode the
following way:
Press and hold simultaneously
and until the appliance is in programme
selection mode.
10
and .