Specifications Of The Extension-Pole-Connected Tool; Safety Devices; Symbols And Warnings; 4-Installation - CAMPAGNOLA PUMA Gebrauchs- Und Wartungsanweisung

3.6.1 Specifications of the extension-pole-connected tool

•
Chain pruner weight with 1.7 m fixed extension pole
•
Chain pruner weight with 1.40-2.00 m telescopic extension pole
•
Chain pruner weight with 1.80-2.40 m telescopic extension pole
•
Cutting bar (14) length:
• 8" bar (14) max. cut :
•
Active safety device (6):
•
Automatic chain (14) lubrication:
•
Min. and max. tension limit of the lead battery:
•
Min. and max. tension limit of the lithium battery:

3.7 Safety devices

•
ON/OFF switch (4): Switches the tool on and off.
•
ON/OFF led light (10): Shows if the tool is on.
•
Active safety device (6): Engages itself automatically when releasing the lever (5) and prevents from any accidental tool
operation.
•
Inertial chain brake (12) (only tool model without extension pole): Stops the chain (15) of the cutting bar immediately.
•
Hand guard (12) (only tool model without extension pole) : Protects the lever (5) in case of accidental tool operating.
•
Bar guard (3): Protects the chain bar (14) during the transport.
•
Chain locking pin (18): Locks the chain (15) in case of breakage.
•
In-built protecting device: Protects in case of pole inversion in the connection to the battery.
•
In-built protecting device: Protects in case of motor overheating.
•
In-built protecting device: Protects in case of max current absorption.

3.8 Symbols and warnings

General warnings
Compulsory reading of the use &
maintenance manual
Compulsory double-handed tool holding
4- INSTALLATION

4.1 Starting the tool

4.1.1 Starting precautions

ATTENTION!
Before starting the motor (24), check that the chain (15) does not touch any object.
Do not work on a tree or a ladder, since it would be extremely dangerous
Before starting any task, it is necessary to wear protective clothing according to picture U and to check that all the safety and
protection devices are efficient and correctly assembled.
Check the chain bar (14) and the chain (15) for proper assembly and the chain (15) for adequate tension.
Check all the fixing screws for correct tightening.
Compulsory feet protection
Compulsory head protection
2.650 kg
3.250 kg
3.450 kg
8"
Ø 150 mm
Yes
Yes
9V – 14V
11.5V – 18.5V
Compulsory hands protection
Compulsory adequate clothing
Chain lubrication