Setup; Unfolding The Handle; Installing The Recoil-Starter Rope In The Rope Guide; Filling The Engine With Oil - Toro 20899 Bedienungsanleitung

Setup

Important:
Remove and discard the protective
plastic sheet that covers the engine.
1

Unfolding the Handle

No Parts Required
Procedure
1. Move the handle rearward and hold the upper
handle in place (Figure
2. Tighten the upper handle knob as tight as you
can (Figure 4).
3).
Figure 3
Figure 4
2
Installing the Recoil-Starter
Rope in the Rope Guide
No Parts Required
Procedure
Important:
To start the engine safely and easily
whenever you use the machine, install the
recoil-starter rope in the rope guide.
Hold the blade-control bar to the upper handle and
pull the recoil-starter rope through the rope guide on
the handle (Figure
g010260
1. Recoil-starter rope
3

Filling the Engine with Oil

No Parts Required
Procedure
Important:
Your machine does not come with oil
g020803
in the engine. Before starting the engine, fill the
engine with oil.
Engine Oil Specifications
Engine oil capacity
Oil viscosity
API service classification
1. Move the machine to a level surface.
4
5).
Figure 5
2. Rope guide
0.55 L (18.6 fl oz)
SAE 30 or SAE 10W-30
detergent oil
SJ or higher
g003251