Figure 8
2.
Squeeze the button on the lever with your
thumb, and fully insert the mulch plug into the
opening
(Figure
9).
Figure 9
3.
Release the button on the lever and ensure that
the top of the lever lies fully in the switch channel
(Figure
10). If the top of the lever is not in the
switch channel, your machine will not start!
g005308
Note:
If the lever does not latch properly,
disconnect the wire from the spark plug and
check for and remove any debris buildup in the
tunnel.
5
Assembling the Grass Bag
No Parts Required
Procedure
1.
Slip the grass bag over the frame as shown in
Figure
11.
g005309
1. Handle
2. Frame
6
Figure 10
Figure 11
3. Grass bag
g005310
g027156