Troubleshooting - Vacmaster Orson Lite VSE2101EU Bedienungsanleitung

Remove the Wand Blockage
1) To clean out the wand, press the wand release button, and pull the wand away from motorized
floor head.
2) Carefully remove any debris or blockage from the inside of the motorised floor head.
3) Reattach the motorised floor head onto the vacuum body.
4) Once the blockage is removed, start the vacuum to ensure air flow through the hose.
CAUTION:
WARNING!
Disconnect electrical supply before performing maintenance to the vacuum cleaner. Failure to do
so could result in electrical shock or personal injury. Remove the handheld unit form the main body
if performing maintenance on the brush roll or motorised floor head.
Cleaning Performance
Vacmaster vacuum cleaners are tested for endurance. If your motor is operational, then the most
likely cause for a loss in suction is a blockage or an opening in the vacuum.
To maintain a high cleaning performance from your machine, it is important to replace or clean
filters as necessary. Empty the dust bin regularly to prevent performance drops. A performance
drop with clean filters can only be caused by a blockage in the tools or the hose connections.
Do not use scissors or other sharp objects to remove a blockage from the hose.

TROUBLESHOOTING

11
GB